EKONOMIZER secondary heat exchanger

EKONOMIZER secondary heat exchanger

EKONOMIZER is a secondary heat exchanger for flue gas/air and is installed in the flue behind the infrared burner. The fan can be powered from the connector on the burner or from a cable from the electrical network with 230 V / 50 Hz. هو

Product Description

Key Features & Benefits

  • Waste Heat Recovery

    Captures residual heat from hot flue gases that would otherwise be lost.

  • Automatic Operation

    Built-in fan starts automatically when surface reaches 42°C; stops below 30°C.

  • Flexible Power Supply

    Fan can be powered directly from the burner's connector or from a standard 230V/50Hz mains cable.

  • Simple Integration

    Designed as a modular component for easy installation directly into the existing flue system.

  • Proven Efficiency Boost

    Adds substantial thermal output (see table), directly supplementing the main heater's performance.

Technical Specifications

Thermal Output

Varies by model and heater size (see detailed table below).

Model Variants

AWTM 100/2000, AWTM 100/4000, AWTM 130/4000 (differ in length/diameter).

Electrical Rating

Operates on standard 230 V / 50 Hz supply.

Compatibility

Designed for HELIOS series infrared tube heaters (Models 10 to 50).

Installation Point

Installed in the flue system immediately behind the infrared heater.

Thermal Output by Model

Thermal output AWTM 100/2000 AWTM 100/4000 AWTM 130/4000
HELIOS 10
420 W
950 W
HELIOS 20
690 W
1200 W
HELIOS 30
1400 W
1720 W
HELIOS 40
1900 W
2350 W
HELIOS 50
2300 W

Installation & Operation

In-Line Flue Installation

Mounts directly in the exhaust duct. Requires professional integration with the flue system.

Automatic Fan Control

Internal thermostat controls the fan based on heat exchanger surface temperature.

Annual Service

Part of the flue system; requires annual inspection for integrity, tightness, and condensate drain clearance.

Primary Purpose & Value

Scroll to Top